eric6.gif (7121 bytes)ERICSSON TELEPHONE No. CL 600


Type CL 600

cl600.jpg (22112 bytes)

Sub-Station Table Telephones for use with an Intermediate Telephone Station
Common Battery System

FRAMEWORK of enamelled steel.

M1CRO-TELEPHONE. RE 10051 with cord RS 6010, resting on a cradle-switch, flexible cable RS 5200 (Old No. 2292), with 3-way plug and terminal block.

GENERATOR. RH 2455, 2-magnet.

RINGER of 1,000 ohms resistance.

LINE CONDENSER of two microfarad capacity.

The terminals are enclosed.

When the sub-station telephone and the intermediate station telephone are in connection, their conversation cannot be overheard by the Exchange, or by any of the lines connected with them. When the sub-station telephone and the Exchange are in connection, the conversation cannot be overheard by the intermediate telephone station.

Overall dimensions:- 11.9 x 9.5 x 5.9 inches.

Weight 10.8 lbs.

Taken from the Ericsson Telephone Catalogue 1912

Home page BT/GPO Telephones Ericsson Telephones Ericsson Home Page Ericsson PABX All Telephone Systems

Last revised: April 09, 2000