eric6.gif (7121 bytes)ERICSSON TELEPHONE No. CL 610


Type CL 610

cl600.jpg (22112 bytes)

Sub-Station Table Telephone for use with Intermediate Telephone Station
Common Battery System

FRAMEWORK. Base and sides black enamelled steel, top-plate of ebonised pear-tree wood.

MICRO-TELEPHONE. RE 1005, with cord RS 6010, resting on a cradle-switch, with flexible cable RS 5200 (Old No. 2292), with 3-way plug and terminal block.

GENERATOR. RH 2460, 2-magnet.

RINGER of 1,000 ohms resistance.

LINE CONDENSER of two microfarad capacity.

The terminals are all enclosed.

If required, and without extra cost, we can supply this telephone with framework enamelled to match walnut.

When the sub-station telephone and the intermediate station telephone are in connection, their conversation cannot be overheard by, the Exchange or by any of the lines connected with them. When the sub-station telephone and the Exchange are in connection, the conversation cannot be overheard by the intermediate station telephones

Overall dimensions:- 12.7 x 8.7 x 5.3 inches.

Weight 10.6 lbs.

Taken from the Ericsson Telephone Catalogue 1912

Home page BT/GPO Telephones Ericsson Telephones Ericsson Home Page Ericsson PABX All Telephone Systems

Last revised: April 09, 2000