ERICSSON TELEPHONE No. N1044


Auto. Intermediate Telephone

n1044.jpg (15812 bytes)Black enamelled steel case with Bakelite cradle stand, Bakelite micro-telephone, automatic dial, four position switch, indicator, 3-magnet generator, 1000 ohm ringer, induction coil and two condensers.

The wall case is fitted with the necessary connecting terminals and a 1000 ohm ringer.

Connections between the exchange, the intermediate telephone and the extension telephone, any two of which can be put into communication are made according to the position of the switch which should, normally, be left in the position marked "normal"; calls from the exchange will then ring the bell in the telephone, and those from the extension, the bell in the wall case.

A ring will, however, be received at the intermediate station, from the exchange or the extension, irrespective of the position of the switch.

The indicator shows when the exchange is speaking with the extension, and the generator is for the purpose of signalling the latter.

Micro-telephone N5852
Induction coil N3519B
Micro-telephone cord N4021
Generator N4664
"Inset" N7745
Generator handle N11599
Mouthpiece N8633
2uF condenser N3652A
Receiver N6815
1uF condenser N3653A
Receiver earpiece N4443
10-way terminal cord N4097
Receiver diaphragm N4400

Telephone
Dimensions: 11 x 10 x 7 inches
Weight: 12lb.

Wall case
Dimensions 8 x 6.75 x 3.5 inches
Weight 3.1lb.

The 'B' variant was introduced in the Cat 26, 1935 Supplement.

A 'D' variant was also produced - which was the phone and wall case - complete.

Taken from the Ericsson Telephone Catalogue, edition No. 26, 1932 Supplement

Click here for an article from the Ericsson Bulletin

Home page BT/GPO Telephones Ericsson Telephones Ericsson Home Page Ericsson PABX All Telephone Systems

Last revised: December 10, 2005