Studio
20Basic telephone for hotel, motel, office or home
Studio
20
Basic
telephone for hotel, motel, office or home
Feature
List
Hotel version with Logo printing service
Two (2) Year parts and labour warranty
Switchable Data port to connect data port to same line as voice or
different line allows simultaneous
Hearing Aid compatible
Ringer volume control
‘Tropicguard’ protection for humid conditions
Noise cancelling handset microphone
Satin matt finish body and handset
New low-profile handset
New Pearl White colour
PBX Recall (100mS Flash)
Wall mounting
Built-in message waiting/ring indicator lamp suits most popular systems
and all other systems
can be suited with an optional
upgrade*
Large paper card insert (which can be printed on a standard laser
printer) allows printing of logos, instructions to users, advertising etc.
| Specifications |
|
| Dial
mode: |
Tone
DTMF |
| PBXRecall: |
100
milliseconds Timed Break |
| Ringer
Lamp: |
Superbright
LED and Neon tube with red bezel |
|
Power
Source: |
Line
powered. Batteries are NOT required |
| Dimensions: |
Width
: 169mm; Length : 225mm;
Height : 90mm |
| Ringer: |
Electronic,
with Hi/Lo/Off settings; 80dBA
at 1 Ft |
| Line
cord and Plug: |
3m
RJ12 to RJ45 with optional 603, RJ11 or RJ12 |
| Wall
mount kit: |
Wall
Mount Kit No. 3 (Order separately) |
| Operating
Temp and Humidity: |
Temperature
: 0°c - 40°c; Humidity : 95% RH max, No dew forming |
| Regulatory
Compliance: |
Complies
with current ACA/Austel standards |
| Colour: |
Pearl
White - ABS plastic |
* Built-in message waiting lamp is compatible with most later systems from Alcatel, Exicom, Fujitsu, NEC, Nortel, Nitsuko, Panasonic, Samsung and Hybrex. AT&T, Lucent, GPT ISDX, GEC Siemens Hicom, Panasonic, Ericsson MD110 and some Hybrex message waiting lamps are optional extras.
Taken
from Manufacturers web site - 2004
| BACK | Home page | BT/GPO Telephones | A - Z Index | Glossary of Telecom Terminology | Quick Find | All Telephone Systems |
Last revised October 13, 2006
FM2