AUTODIAL No. 5000

The Autodial No. 5000 is an Autodial No. 108C (Tyne) with the internal link set to NO (Normally Open) although the slide switch is set for Loop Disconnect pulsing.  The Autodial No. 5000 is approved as issued for use on AESS and Senator systems.

If necessary, an Autodial No. 5000 may be restored to an Autodial No. 108C by removing the base and returning the plug ended wire link to NC (Normally Connected).  Any other signalling changes are made as for the Autodial No. 108 detailed above.

The autodial was supplied in an Ambassador style case, coloured Stone, Grey and Brown.


PARTS

DESCRIPTION BT Item code
Autodial  No. 5000  Brown (Tyne with internal link set to NO) 870188
Nickel Cadmium Battery 100 mAh, 3.6 volt (PCB mounting) 665376
Fuse No. 73/0.16 (Plug top transformer fuse, not always provided) 314317
Line Jack Unit No. 10/7A Doubler Jack with Cord 374422

FOR FURTHER INFORMATION REFER TO AUTODIAL No. 108A

 
 
BACK Home page BT/GPO Telephones Search the Site Glossary of Telecom Terminology Quick Find All Telephone Systems

Last revised: December 31, 2022

FM