1 / 20
Telephone Assembly - Fixing the dial cord terminal strip - Telephone looks like a GEC ST 3604 - the later version
2 / 20
Bell Ringer assembly - ringer coils in the bottom of the far bin and yokes on the top
3 / 20
Dial Assembly - Number plate being inserted
4 / 20
Telephone Assembly - Chassis Assembly - GEC ST3604 - Later model shown
5 / 20
Dial Assembly - Assembling the springset unit
6 / 20
Telephone Assembly - Testing the gravity switch hook spring tensions - GEC ST3604 - Later model shown
7 / 20
8 / 20
Telephone Assembly - Packing the phone for shipping
9 / 20
Dail Assembly line
10 / 20
300 Type Telephone - Fixing the feet to the base plate
11 / 20
300 Type Telephone - Installation of gravity switch hook mechanism
12 / 20
300 Type Telephone - Installation of gravity switch hook mechanism
13 / 20
300 Type Telephone - Dial cord about to be fitted to dial. The dial is held in a special jig.
14 / 20
300 Type Telephone - Fixing the wiring loom to the terminal block. Note the rather hefty soldering iron.
15 / 20
300 Type Telephone - fitting the terminal block and wiring loom
16 / 20
300 Type Telephone - wiring sub compents to the wiring loom
17 / 20
300 Type Telephone - Fitting the induction coil, bell ringer and dial terminal block
18 / 20
300 Type Telephone - Fixing the bell gongs in place
19 / 20
300 Type Telephone - Fixing handset and line cords to the chassis
20 / 20
300 Type Telepone - Checking the tension of the gravity switch springs with a tension gauge
❮
❯