"Tropical"
Central Battery Wall Set

This set is exactly the same as Figures 101 and 102 (Code No. 101), but the equipment and woodwork differ as will be readily observed by a comparison of the specifications. We have manufactured large quantities of telephone material for use in tropical climates for many years, and our ripe experience enables us to place on the market a telephone which we guarantee will give long and satisfactory service under the most severe climatic conditions.

Fig. 101 STANDARD CENTRAL BATTERY WALL TELEPHONE Code No. 100 Standard Finish - Nickel Plated Approximate Weight, 8lbs. 6ozs.	Fig. 102 "STANDARD" CENTRAL BATTERY WALL TELEPHONE Open for Inspection Simple, Strong and Symmetrical

Cabinet Work: Old stock teak.

Coils: Wound with non-hygroscopic enamel insulated wire.

Ironwork: Zinc-coated where not otherwise protected.

Instrument connections: Moisture-proof conductors and Enamel insulation with silk and cotton coverings.

Cords: High insulation, moisture-resisting.

Code No. 101.
Standard Finish: Nickel Plated.
Approximate weight, 8lbs. 6ozs.

Taken from the Peel Conner Telephone Works Ltd Bulletin No. 2 - dated 1911

Click here for CB article

Last revised: August 01, 2025