Lamp Fitting No. 16A


Used on the Telephone No. 710.  One or two Lamp Fittings No. 16A may be fitted to the mountings provided on the gravity-switch spring-set brackets.

To fit the lamp fittings remove the slotted nut, plain washer, tag and insulating bush from the lower end of the lamp fitting.  Offer the lower end of the lamp fitting to the top face of the mounting bracket and insert the insulating bush into the mounting bracket from below.  Replace and secure the tag, plain washer and slotted nut in that order.

When these lamp fittings are used, replace the existing cover, Part 5/DCO/627 by a Part 6/DCO/627 which has a clear lens fitted to each side of the front sloping face.  A Lamp No. 26, requisitioned separately, is used with the Lamp Fitting No. 16A.

Includes:-
1 x Jack, Lamp No. 59A.
1 x Part 1/DRE/2.

Drawings - 91604 and 92131.

Made by Ericsson their part N95545.

The bracket is not normally included

 

 

 
BACK Home page BT/GPO Telephones Search the Site Glossary of Telecom Terminology Quick Find All Telephone Systems

Last revised: July 27, 2024

FM