| Description |
Hedge Cutter, Electric, Orange |
| Make |
|
| Model |
|
| Type |
|
| Body Builder |
|
| Use |
|
| Registration Number |
|
| Fleet Number |
|
| Date of picture |
1964 |
Electric Hedge-Cutter
The electric hedge-cutter consists of a universal motor which drives a
single-edged reciprocating cutter-bar through an oil-filled worm-and-gear
unit. The cutter bar is 16.5in. long and reciprocates at a rate of 350
cycles/minute. Two handles are fitted at convenient points of balance, and a
double-pole switch is located in one handle. A webbing harness may be
attached to the tool so that the weight of the hedge-cutter can be sup
ported on the operator's shoulders when the tool is used for long periods.
The hedge-cutter has a full-load rating of 350 watts and
weighs 12 lb
