| Option 1 - Call Forwarding type |
Exchange line date S2 first byte =
00 |
| One extension rings only |
S2 second byte = extn port |
| |
|
| Option 2 - Call Forwarding type |
Exchange line data S2 first byte =
01 |
| First extension rings for a predetermined time and then the
second extension rings until the call is answered. |
S2 second byte = extn port a
S2 third byte = extension port b |
| |
|
| Option 3 - Call Forwarding type |
Exchange line data S2 first byte =
02 |
| Extension a rings for a predetermined time and then
extension b rings for a predetermined time after this the call will ring
at the first port (11) and step through all the ports until the last port
(16 or 32) is reached. |
S2 second byte = extn port a
S2 third byte = extension port b |
| |
|
| Option 4 - Call Forwarding type |
Exchange line data S2 first byte =
03 |
| Extension a rings for a predetermined time and then
extension b rings for a predetermined time after this the call will search
for the first free extension starting at the first port (11) and stop once
a free extension is found. |
S2 second byte = extn port a
S2 third byte = extension port b |
| |
|
| Option 5
- Call Forwarding type |
Exchange line data S2 first byte =
11 |
| Group call (up to four extensions all ringing
at the same time |
S2 second and third byte unused
Group is programmed on a per line basis in Group Call section |