|
Resistors No. 2
A resistor consisting of two resistances in one package. |
|
|
Resistors No. 6
Wound on a ceramic spool and fitted with connection tags arranged for
soldering direct to capacitor terminals. The winding is covered
with green vitreous enamel. Used as a spark quench resistor for use on
capacitors. Range - 10, 20, 50, 100, 200, 500 and 1000 Ohms. Size -
18mm x 8mm x 13mm. |
 |
|
Resistors No. 9 and 9A
Wound on a white, moulded ceramic spool, these can be inductive or
non-inductive. Rating up to 500 ohms - 10 Watts.
Rating over 500 ohms - 8 Watts. Tolerance - No. 9
1ohm +/- 10%.
1-10 ohms +/- 5%.
Over 10 ohms +/- 2.5%. Tolerance - No 9A
All +/- 1%. Size - Height 25mm x Diameter 25mm.
|
 |
|
Resistors No. 12 and 12A
Wound on a moulded Bakelite spool with solder tags. Can be inductive or non-inductive.
Range - 4 to 50000ohms. Rating - 2 Watts. Tolerance - No. 12 - +/- 2.5%.
Tolerance - No 12A - +/- 1%.
Size - Height 16mm x Diameter 25mm.
|
|
|
Resistors No. 15 and 15A
Wound on a moulded Bakelite spool. Inductive. Range - 0.5 to
50000ohms.
Rating - 0.5 Watts.
Tolerance No. 15 - +/- 2.5%.
Tolerance No. 15A - +/-1%.
Size - Height 7mm x Diameter 25mm.
|
 |
|
Resistors No. 25 Wound on a white, moulded ceramic spool with a
hollow centre to prevent overheating. Range - 100ohms only. Rating -
10 watts. Size - Height 27mm x Diameter 27mm.
|
|
|
Resistors No. 40 Miniature, wire wound, vitreous enameled
resistor, suitable for use in series with Lamps. Range - 800, 1000,
1150, 1200, 2000 and 5100. Rating - 6 Watts. Size - Length 16mm x
Diameter 7mm. |
 |
|
|
|