Changing the Date and Time
Click on the system that you require
BT S2616 & Emblem
From and Executive telephone
- Enter program mode
- To set Time - Press CLOCK
- Key # if PM required
- Key HHMM
- key *
- Key #
- To set date - Press CLOCK twice
- Key MMDD
- Key *
- Key #
- Press CLOCK three times
- Key YYYY
- key *
- key #
- Press CLOCK four times
- Key day number (0 = Sunday .... 6 = Saturday)
- Key *
- Key #
- Exit program mode
- back to top -
BT Monarch
From the Console
- Press MMI key
- Enter password followed by #
- When display shows MMI READY
- To set Time - Press *555*HH*MM# (24 hour format)
- To set Date - *666*DD*MM*YY#
- Press release to leave MMI mode
- back to top -
BT NORSTAR COMPACT
Using any M7208, M7310 or M7324 telephone
Setting the system Time
- Press FEATURE
- Key **ADMIN
- Key in the admin PASSWORD
- Press NEXT
- Press SHOW
- Press CHANGE
- Key in HH
- Press NEXT
- Press CHANGE
- Key in MM
- Press NEXT
- Press CHANGE to toggle between Am and Pm
- Press RLS or NEXT to continue in Admin
Setting the system Date
- Press FEATURE
- Key **ADMIN
- Key in the admin PASSWORD
- Press NEXT
- Press SHOW
- Press NEXT
- Press CHANGE
- Press CHANGE
- Key in YY
- Press NEXT
- Press CHANGE
- Key in MM
- Press NEXT
- Press CHANGE
- Key in DD
- Press RLS or NEXT to continue in Admin
- back to top -
BT Pentara 100 & Pentara Plus
From a master terminal
- Lift handset and press 657000
- To set Time - Press and hold down P (Program) button
- Key 650
- Key HHMM (24 hour format)
- Release P
- To set Date - Press and hold down P (Program) button
- Key 656
- Key YYMMDD
- Release P
- Replace handset
- back to top -
BT Octara
At the programming telephone
To set the Time
- Press RECALL 95 followed by MM
- Press HOLD
- Press RECALL 96 followed by HH (in 24 hour format)
- Press HOLD
To set the Date
- Press RECALL 97 followed by DD
- Press HOLD
- Press RECALL 98 followed by MM
- Press HOLD
- Press RECALL 99 followed by YY
- Press YY
- Press HOLD
- back to top -
BT Revelation
From the programming telephone
- Dial 70 followed by the system PIN
- Systemphone shows Dial Admin Code
- Dial 4
- Enter the Time HHMM# (in 24 hour format)
- Enter the Date DDMMYY#
- Press HandsFree
- back to top -
Ericsson BP50 & BP250
From Main Extension
- *00#
- Select System Programming
- 33333
- 2nd #
- 6103
- 2nd #
- 2nd #
- Enter The Time Hh Mm Ss
- 2nd #
- C To Exit Programming
- back to top -
Ericsson BP Select
On Main Display Phone
- Press Hold
- Dial * 1 2 3 4
- Push Down The Cursor Key(This Is The Second Key In From The Left On The
Second Row Of Buttons Below The Screen)
- Push Until Display Says "Command Number"
- Dial 0 1 Then Push Down The Cursor Key
- Enter The Date ie 01
- Enter The Month ie 01
- Enter The Year ie 1999
- Enter The Day ie 1 For Sunday 2 For Monday 3 For Tuesday Etc
- Enter The Time ie 09:30
- Push Down The Cursor Key
- Push The Spk Button
Telephone Will Return To Normal Display
- back to top -
Panasonic DBS
At The Operator Handset Press The On/Off Button
- Press Recall
- Dial #4
- Dial 4 Digit Time i.e. 0930
- Press The On/Off Button
- back to top -
Toshiba DK40 & DK16
From extension 10and with the handset on-hook
-
Press the Internal button
-
Dial #652
-
Dial the time in the 24 hour clock format HHMMSS. Enter a
leading 0 for any single digit entered.
-
Press the Redial, or press the # button if your phone doesn’t
have a redial button
-
Press the Spkr button
Toshiba DK96
From Extension Port 00 (Extn 200) and with handset on hook
Time
- Press Intercom or INT
- Dial 652
- Dial the date in 24 hour format as HH MM SS
- Press Redial or RDL (if no RDL button press the # key)
- Press Spkr
Date
- Press Intercom or INT
- Dial 651
- Dial in the date in the format DD MM YY
- Press Redial or RDL (if no RDL button press the # key)
- Press Spkr
Day of week
- Press Intercom or INT
- Dial 653
- Dial in the day - 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday, 5 =
Thursday, 6 = Friday, 7 = Saturday
- Press Redial or RDL (if no RDL button press the # key)
- Press Spkr
Toshiba DK280
From Extension port 00, with handset on hook
- Press Intercom or INT
- Dial #652
- Enter Correct Time HH MM SS in 24 hour format
- Press Redial
- Press Spkr
Toshiba CTX 670 & CTX 100
Login to programming mode from your telephone button pad:-
-
Press Hold *#*#1*2*3*
-
At the PASSWORD= prompt, Enter 0000 and press Hold
-
At the PROG= prompt enter 902 and press Hold
-
Press FB01 (Intercom Key) to enter current Date. Enter date
in this format YYMMDD
-
Press Hold to program
-
Press FB02 (Button above Intercom Key) to enter current
time. Enter the time in the format HHMMSS
-
Press Hold to program
-
Press Hold to submit, then # # Hold to return to the PROG=
prompt
-
Enter # # Hold again to exit programming mode
- back to top -
GPT DXE
From Extension 10 or Operator Position
- Ensure All Lines Are Idle
- Lift Handset And Listen For Dialling Tone
- Dial SET SHIFT * 7 HHMM (Correct Time In 24 Hour Clock)
- Press SET
- Replace Handset
- back to top -
Siemens Hicom 100 Series (110/120/125/130)
With A Display Handset Plugged Into The First Extension (Usually 20 or
200)
- Press Service
- Press Hold
- Dial 756
- Press Service
- Dial 9 * 0 4 *
- Dial The Hours (00-23) Followed By *
- Dial The Minutes (00-59) Followed By *
- Lift And Replace The Handset
- back to top -
For Imagination or Contact systems dial from a supervisor phone (usually the
reception or main phone)
Date 656 DDMMYYYY
Time 655 HHMM
- back to top -
Panasonic KXT 1232
From Extension
- Set Memory Switch On Back Of Phone To "Program"
- Dial 0
- Enter Year, Last Two Digits ie 99
- Enter Month (01-12)
- Enter Day (1-31)
- Enter Day Of Week ie 0=Sunday,1=Monday,2=Tuesday Etc.
- Enter The Hour Hh (00-12)
- Enter The Minute Mm (1-59)
- Dial 0 For Am Or 1 For Pm
- Press Autodial Button
- Return Memory Switch To Original Position
- back to top -
Panasonic KXT 308-616
From Extension 21
- Lift Handset
- Dial 77
- Dial Hour (00-12)
- Dial Minutes (1-59)
- Dial 0 For Am 1 For Pm
- Dial #
- Replace Handset
- back to top -
Panasonic DBS
At Operators Console:
-
Press ON/OFF
-
Press Recall/PROG
-
Dial #3 ddmmyyhhmm
-
Press ON/OFF
- back to top -
Panasonic "A" Series
From Extension 10:
- Push The On/Off Button
- Dial * 5
- Dial The Hours Hh (09)
- Dial The Minutes Mm (59)
- Push The On/Off Button
At Operators Console:
-
Press ON/OFF
-
Dial *000 7# *100 hhmm #
-
Press ON/OFF
- back to top -
Panasonic SDBS
At Operators Console:
-
Press ON/OFF
-
Press Recall
-
Dial #4 hhmm
-
Press ON/OFF
- back to top -
Plessey PKS1 1236 and 2260
At A Display Handset Press And Hold Down The RS Button
- Press Clock
- Press *
- Dial The 4 Digit Time ie 0930
- Release The RS Button
- back to top -
Plessey Masterline PKS1 616
At Extension 10 Only When The Extension Is Idle.
- Lift The Name Card Covering The DSS Keys (F1-F16)
- Press The WR Button With A Pen Or Pencil
- Press The Clock Key
- Key In The Time ie 09 30 A.M
- Key 0930
- 09 30 P.M
- Key #0930
- Press The * Key
- Press The # Key
- Press The WR Button
After 10 Seconds The New Time Will Appear On All Display Phones. Replace The
Name Card.
- back to top -
GPT MASTERLINE PKS2
From Extension 10
- Lift Handset
- Press Save And Clock
- Dial The Year ie 1999 Followed By The *
- Dial The Month And Day ie 0401 Then *
- Dial The Day ie 1 For Monday 2 Then *
- Dial The Time Hh Mm (In 24hr Clock) ie 0715
- Dial *
- Replace The Handset
- back to top -
OMNI/NTX30
From the console
Go into Recent Change to change Time and date
SDX 40e
From A System Managers Phone (Usually 20 or 22)
- Press 8 then P (If This Does Not Work Try * then P)
- Enter Password 9999
- Enter New Time ie 0930
- Press H
- Press P
- back to top -
SDX 60/180/420
From an Ft4 Handset
- Press *P
- Enter System Password
- Press AAAAA
- Press E
- Press A
- Enter Time HH#MM#SS ie 09#30#00
- Press E
- Press P
- back to top -
Mitel SX10 & SX20 (and BT Kinsman & Viceroy)
At the test extension or Console
- dial *15 (24 hour)
- Enter Time in 24 hour format HHMM
- Press release
- Dial *80
- Enter Date DDMMYY
- Press release
- back to top -
Mitel SX200 & BT Regent & Royale
From the Console or Test extension
- To set Time - Press *5
- Enter time HHMM in 24 hour format
- Press Release
- To set Date - Press *15
- Enter date MMDD
- Press Release
- Press IDENT button to check date
- back to top -
Mitel SX2000
At the Console
- Push Command 1 (Prompt Will Ask For Name)
- Type Maint1 Enter
- Type SX2000 Enter
- A Menu Will Appear
- Push Command Mai
- Type Time
- System Will Ask If You Want To Change The Time
- Type In New Time In 24hr Format i.e. 0930
- Then Use The "F" Key To Logout
- back to top -
SDX Index System (Lucent - Avaya)
At System Manager Extension
- Press Setup (Soft Key On Display)
- Press Time
- Dial in the Time in 24 hour format HHMMSS
- Press Done
- back to top -
Siemens
Hicom Office Range
At System Manager Extension (201
or 21 usually)
- Dial *95
- Display reads "Enter User
"
- Dial *95 & tick
- Scroll to TIME & tick
- Tick
to alter time
- Dial In The Time ie HHMM
- Press Tick
& lift handset & release
- back to top -
Siemens Hicom 100e Range (112,118)
At System Manager Extension (200
or 11 usually)
- Dial *94
- Press Tick to enter
- Scroll to
TIME & tick
- Tick to alter time
- Dial In The Time ie HHMM
- Press Tick & lift handset & release
-
back to top -
NITSUKO DXE
Use a Display Phone
- Press CL1 Key
- Dial 828 & P (Where P is system password - 0000)
- Dial two digits for Year e.g. 00
- Dial two digits for Month (01-12)
- Dial two digits for Day (01-31)
- Dial day of the week (0-6 , 0 = Sunday , 1 = Mon , 6 = Fri)
- Dial two digits for the hour (00 - 23)
- Dial two digits for the minute (00 - 59)
- Press SPK key to hang up
- back to top -
Goldstar
LG / Crane GDK (Models 34i,70,100,186)
At Attendant phone
- Dial TRANS/PROG #1
- Enter * + HHMM
- Press HOLDS/SAVE to store
- Press SPEAKER key to return to normal
Goldstar GSX 408/816/1832/3672
At Attendant phone
- Key 299
- Key YYMMDDHHMM
- back to top -
ISDX/TDX
At Operators console:
-
Dial ###2 HHMM
- back to top -
|