| Make |
Morris |
| Model |
J2 |
| Type |
15cwt Utility Vehicle Type 2 (Morris) |
| Body Builder |
Diesel |
| Use |
Utility (dual passenger seat) |
| Registration Number |
DLL 539C |
| Fleet Number Ranges |
U88313 to U88316 (977 - 980 ELP) 1962
U88317 to U88508 (357 - 548 ELP) 1962
MU95409 to MU95654 (1 - 246 FYM) 1963
MU96788 to MU96857 (930 - 999 GPO) 1963
U97945 to U98124 (386 - 565 GXF) 1963
U98396 to U98595 (ALB 552B - 751B) 1964
U98796 to U98822 (ALC 802B - 828B) 1964
U99843 to U99842 (BLO 1B - 999B) 1964 (Diesel)
U99843 to U99999 (BUV 1B - 157B) 1964 (Diesel)
U106000 to U106162 (BUV 158B - 320B) 1964 (Diesel)
U109903 to U110901 (DLL 1C - 999C) 1965
U110902 to U111252 (DYR 1C - 351C) 1965
U111253 to U111542 (ELH 1C - 709C) 1965
U111543 to U112252 (ELP 1C - 710C) 1965
U112263 to U112528 (EYV 734C - 999C) 1965
U112529 to U112627 (GLE 1C - 99C) 1965
U112628 (GLU 672C) 1965
U112629 to U113312 (GLE 1001C - 784C) 1965 |
| Date of picture |
March 1965 |
General description and facilities
This vehicle supersedes the Type 1 version. It is a commercial
forward control van with .both near-side and rear door access to the vehicle
body. The vehicle is equipped internally with adjustable aluminium slotted
angle racking and has a roof ladder rack mounted on the near-side. An
additional 3 section ladder may be carried on a special shelf on the top of
the off-side internal racking. The vehicle is intended for the use of
one or two man parties who require to carry between 5 cwt. and 15 cwt of
stores and tools, e.g. installation parties or construction jointers.
On early models
(U 88313 to U 96857 inclusive) the provision of mild steel racking limited
the pay load to 14 cwt. A temporary third seat may be fitted to a proportion
of these vehicles for use by a trainee or an occasional passenger.
Where a third seat is fitted and an additional passenger carried, the pay
load must be reduced by 1 cwt. and distributed to give approximately equal
wheel loadings. Vehicles in the range U 109903 to 111252 are fitted
with a double passenger seat but this may be removed and converted into a
normal single seat if required. On no account may these vehicles be
used for Parties whose regular size exceeds two men.
Taken from - ENGINEERING INSTRUCTIONS, TOOLS & TRANSPORT, VEHICLES N1221
(Issue 1, 24.3.66)
POEEJ
Article - 1961
POEEJ
Article - 1964
