Installation Manual
Parts List
Programming Manual
User Guide - SLT
PXML No. BABT/PXML/SCR.0053
APPROVAL No. S/1010/3/J/501332
 Analogue
Panasonic PBX Systems for 3 lines & 8 extensions.
Discontinued in 1997 and replaced by KX-TEA308.
The Panasonic
KX-T30810 is a stored program
control (SPC) analogue key telephone system utilising Microprocessor control techniques.
it comprises a unit incorporating a 240 volt power supply and uses three types
of proprietary telephone instrument.
All power requirements are provided from the AC
mains. Visual indication of call arrival and status is given by LEDs
(Light Emitting Diodes), at each telephone instrument. Interconnection
between the main unit and the extension telephone is by way of an external
distribution frame (MDF), via the terminal block using 2 pair cable.
A power-fail enables one or more standard
telephones to be connected to the system. In the event of a mains power
-failure the system automatically switches to basic facilities enabling users to
make and receive PSTN calls only.
The apparatus must be connected to the PSTN by the
connection of the incoming PTO cables to the Test Jack Frame (TJF) which is
separately mounted from the main unit.
It requires at least one Featurephone, the KX-T7130E, for
programming purposes.
The system supports LCR, door intercom/opener, call hold and transfer, flexible
incoming ring on extensions, call barring, 100 number speed dial, paging, intercom.
The display phone requires four wires to each socket whilst
two
wires are needed for basic POT extensions.
Panasonic refers to these as an Electronic Modular
Switching System.
Programming
To default the system
Set the programming switch to PROGRAM and from extn 21 enter 99, then press the NEXT (speaker phone) button, then press MEMORY (auto. memory) and then the END (hold) button. Afterwards return the program switch to SET.
LJU Wiring
|
LJU 2/3A
|
|
Wire colour
|
|
2
|
- |
Red
|
|
3
|
- |
Black
|
|
4
|
- |
Yellow
|
|
5
|
- |
Green
|
Extensions and lines are terminated at the system end on RJ11 plugs,
which should be supplied with the system.
Panasonic Telephones that CAN be used to programme a 308/616 system
KX-T30830
KX-T61630
KX-T123230
KX-T7030
KX-T7130
Panasonic Telephones that CANNOT be used to Programme a 308/616 system
KX-T30820
KX-T30850
KX-T61620
KX-T61650
KX-T123220
KX-T123250
KX-T7020
KX-T7050
KX-T7120
KX-T7150
The telephones below are older models and were originally sold with the KX-T30810,
KX-T61610 and KX-T1232 systems.
KX-T30820 - Featurephone telephone (3 CO).
KX-T30830 - Featurephone telephone with LCD (3 CO).
KX-T30850 - Featurephone telephone (3 CO).
KX-T61620 - Featurephone telephone (6 CO).
KX-T61630 - Featurephone telephone with LCD (6 CO).
KX-T61631 - Featurephone telephone with LCD (6 CO).
KX-T61650 - Featurephone telephone (6 CO).
KX-T123220 - Featurephone telephone (12CO).
KX-T123230 - Featurephone telephone with LCD (12CO).
KX-T123250 - Featurephone telephone (12CO).
Also
KX-T7055, KX-T7020, KX-T7030, KX-T7130, KX-T7135, KX-T7320, KX-T7320 and
KX-T7335
KX-T30850E
|
Panasonic KX-T 308 Programming
Codes
Move switch in cabinet to
PROGRAM. Use station 10 phone to program |
|
Code |
Description |
|
00 |
Time/Date |
|
01 |
System
Speed Dial 00 to 99 |
|
02 |
CO
Connection Assignment Connect/No Connect |
|
03 |
Dial Mode
Tone/Pulse |
|
04 |
System
Switching Mode Automatic/Manual |
|
05 |
System
Switching Time |
|
06 |
Outward
Dialing Day |
|
07 |
Outward
Dialing Night |
|
08 |
Ringing,
Day |
|
09 |
Ringing,
Night |
|
10 |
Toll
Restriction Class Assignment |
|
11 |
Toll
Restriction, Area Code selection |
|
12 |
Programmable Operator Call |
|
13 |
Host PBX
Access Codes |
|
14 |
Automatic
Answering Automatic/Manual |
|
15 |
Preferred
Line Assignment |
|
16 |
Programmable Call Waiting |
|
17 |
Duration
Time Count start Mode |
|
18 |
Hook Switch
Flash Timing |
|
19 |
Disconnect
time 1.5 seconds or 4.0 seconds |
|
20 |
Calling
Party Control |
|
21 |
Intercom
Alert Tone Tone Call/Voice Call |
|
22 |
Door Phone
Ringing |
|
23 |
Dial Call
Pickup Group Group 1 or Group 2 |
|
24 |
Busy Tone
Selection Tone 1 or Tone 2 |
|
25 |
Hold Time
Reminder 1 min. to 9 min. |
|
26 |
Hold Recall
Time 30 Sec/1 Min./1.5 Min./2 Min./Disable |
|
27 |
External
Pager Access Tone Enable/Disable |
|
28 |
DTMF
Receiver Check |
|
29 |
Programmable Secret Speed Dials |
|
30 |
Transfer
Recall Time |
|
31 |
Automatic
CO Line Access, Outgoing |
|
32 |
Programmable Call waiting Tone Type |
|
33 |
Executive
Bust Override |
|
34 |
Parallel
connection of a SLT with a Proprietary Telephone |
|
35 |
F1/Save
Changes the F1 key to a Save Key |
|
37 |
Carrier
Codes Assignment |
|
98 |
Station
Program Clear |
|
99 |
System Data Clear |
|