|
Baseboard No. 5
Used with Box, Coin Collecting No. 1A or 10.
Dimensions - 17" x 6" x 1.1".
|
|
|
Baseboard No. 6
Used with Box, Coin Collecting No. 7.
Dimensions - 13.5" x 6" x 1.1".
|
|
|
Baseboard No. 7
Used with the Transmitter, Baudot.
Dimensions - 14.75" x 8.5" x 1".
Includes:-
1 x Baseboard No. 8.
1 x Condenser MC No. 14.
1 x
Cord, Instrument No. 360.
1 x Cord, Instrument No. 902.
1 x Jack No.
25.
1 x Key No. 73D.
1 x Plug No. 902.
1 x Relay, Selector W.E.
Co.
1 x Spool, Resistance No. 1, 150ohms.
1 x Spool, Resistance No.
1, 600ohms.
Diagram - TG374 and TG377.
|
|
|
Baseboard No. 8
A Cast Iron base with 90 clips and tags. Used with the
Transmitter, Multiplex No. 1B.and fitted to a Baseboard No. 7.
Drawing - 8298.
|
|
|
Baseboard No. 9
Used with Units, Auxiliary, Apparatus.
Will mount:-
1 x Coil, Repeating No. 4006A.
1 x Condenser MC No.
30.
1 x Condenser MC No. 38.
2 x Mountings No. 4/6A.
Dimensions - 10" x 8.25" x 2.6".
Drawing - 8368.
|
|
|
Baseboard No. 11
Wooden base for mounting Relay,
Standard G. Fitted with nine Terminals No. 24.
Dimensions - 7.5" x 6.25" x 1.9".
|
|
|
Baseboard No. 12
Wooden board with six retaining clips.
|
|
|
Baseboard No. 18
Hardwood wall board fitted with a Block, Terminal No. 20/4.
Drawing - 7303.
Specification - S498.
|
|
|
Baseboard No. 19
Mounting for Relay No. 299A
Diagram - TG692.
|
|
|
Baseboard No. 20
For holding one spare Machine, Pulsing, No. 1 with 2 Brackets and
Mounting Bar.
Includes:-
2 x Hooks, Receiver H.
Dimensions - 24" x 16".
Drawings - 9943 and 9948.
|
|
|
Baseboard No. 24
Diagram - TG1104.
|
|
|
Baseboard No. 26
A metal framed mounting for Relays,
Standard BN, GN, HN, 299HN and 320AN. This mounting has a plug
if which mates with the relay's jack.
Drawings - 9575 and 9576.
Diagram - TG751.
|
|
|
Baseboard No. 27
An enamelled black, metal bracket containing a power socket and a Jack.
Includes:-
1 x Jack No. 52.
1 x Capacitor MC No. 102.
1 x
Socket-outlet No. 8A.
Drawings - 60177, 64202, 64205 and 64199.
Diagram - LD3.
Diagram - TG2655.
|
|
|
Baseboard No. 28
Used on Teleprinter Private Wire Circuits at the renters office with
facility for switching from Tariff A to Tariff D or Telex services.
Includes:-
1 x Cap Lamp No. 2.
1 x Clip No. 30.
3 x Capacitors
MC No. 1 02
1 x Jack No. 50.
1 x Jack, Lamp No. 10.
1 x Key No.
297.
1 x Keys No. 208.
1 x Label No. 164.
1 x Socket Outlet No.
8B.
1 x Rectifier Element No. 1/12AZ.
1 x Relay No. 507A.
1 x
Resistor, Coil No. 9 300 ohms.
1 x Resistor, Coil No. 12, 2K ohms.
1
x Resistor, Coil No. 15, 1Kohms.
1 x Ring Switch 5/8in. diameter.
1
x Switch Tumbler.
1 x Block, Terminal No. 21/10
1 x Lamp No. 2, 50v.
Drawing - 60462 and 60463.
Diagram - TG831.
Specification - TG2090.
|
|
|
Baseboard No. 30
For use with Demonstration Set No. 6B.
Dimensions - 4.5" x 6" x 1/2".
Drawing - 63385.
Diagram - LD140.
|
|
|
Baseboard No. 31
For use with Demonstration Set No. 6A.
Dimensions - 4.5" x 6" x 1/2".
Drawing - 63386.
Diagram - LD140.
|
|
|
Baseboard No. 34A
A wooden bracket for mounting two Jacks, Lamp No. 12 to the side of
Equipment, Table, DTN 2000.
Includes:-
2 Jacks, Lamp, No. 12.
2 fixing screws and
washers.
To be requisitioned separately:-
2 x Resistor, Bulb No.
11, 100ohm.
Drawing - 64211.
|
|
|
Baseboard No. 35
A steel plate with ventilated cover, painted in black enamel.
Includes:-
1 x Block, Terminal No. 21/3.
2 x Condenser,
Electrolytic 80mfd.
2 x Resister, Coil No. 28, 400ohms.
Dimensions - 10.56" x 6" x 3.5".
Drawing - 64135.
|
|
|
Baseboard No. 36
This is a wooden cabinet with a steel base plate.
Includes:-
2 x Condenser MC No. 102.
1 x Jack No. 52.
1 x
Jack, Lamp No. 25.
1 x Plug No. 903.
1 x Relay No. 6252.
1 x
Relay No. 4185.
1 x Resistor, Coil No. 9, 2000ohms.
Drawing - 64039.
|
|
|
Baseboard No. 37
Steel container, used to house a tape exhausted warning light on a
Printing Reperforator position.
Includes:-
1 x Jack No. 300BN/3.
1 x Jack, Lamp No. 10.
2 x
Rectifier-Element No. 1/12AZ.
1 x Resistor, Coil No. 9, 2000ohms.
Drawing - 64391.
Drawing - TG(L)1183.
|
|
|
Baseboard No. 38
This is a Plywood board fitted with four brass screw cups.
Dimensions - 14" x 10" x 1/2".
Drawing - 64470.
|
|
|
Baseboard No. 39A
This is the base plate of a Unit, Telegraph No. 27A, Portable. It
is a grey painted Plywood board fitted with four brass screw cups and a
Plug No. 615A.
Dimensions - 12" x 7" x 1/2".
Drawing - 64471.
Diagram - TG5661.
|
|
|
Baseboard No. 40
This is the wooden base for Stand, Testing No. 7 or 16. Fitted
with a central wing nut.
Dimensions - 17" x 11" x 1".
Drawings - 70796 and 70799.
|
|
|
Baseboard No. 41A, 41B and 41C
For mounting Meters No. 19 on cordless P.M.B.X. CB 935 etc. for S.T.D.
use.
Made of hardwood and ebonised.
No. 41A - Mounts 1 meter.
No. 41B - Mounts 2 meters.
No. 41C -
Mounts 3 meters.
Includes:-
2 x Parts No. 1/SCU/11 and fixing screws.
To be requisitioned separately as required:-
2 x Screws 4BA
X 4".
2 x Washers.
Drawing - 91084.
|
|
|
Baseboard No. 42
S.R.B.P. circuit board fitted in a Unit, Signalling TG2164.
Drawing - 68027.
|
|